Designs that skip a compliance pass before permitting fail plan check often enough to cost $40K+ in redesign fees and lost schedule, on average. Run a full compliance check while your design can still change, not after a plan checker finds the problem for you.
Compliance Check
Illustrative data, not a real project. Swap for a real product capture once available.
One model, checked as your design changes, not corrected after you're at permitting.
Run a full Title 24, IECC 2024, and ASHRAE 90.1 pass/fail check the moment your design changes, not after a plan checker's queue finally opens it.
Illustrative comparison, not a measured benchmark.
Code Path
Prescriptive or performance, Buildwiser matches the correct path to your jurisdiction and climate zone automatically, so you're not modeling against the wrong standard from the start.
Envelope, mechanical, and lighting are checked independently and together, so you know exactly which system needs a redesign, not just a page number to look up.
Live Compliance Check
Amendment Check
Every jurisdiction layers its own amendments on top of the base code. Buildwiser applies yours automatically: the same ones a plan checker would look for, not just the statewide minimum.
See prescriptive, performance, and above-code scenarios side by side, and know which one clears compliance with the most margin before you lock your design.
Scenario Comparison
Title 24 Documentation
Every form a Title 24 submittal requires, generated directly from your model, not assembled by hand.
Title 24 (2025), IECC 2024, and ASHRAE 90.1, plus your jurisdiction's locally adopted amendments, matched automatically to your project address.
You get the specific system that failed (envelope, mechanical, or lighting) and the margin by which it failed, plus alternate paths that would pass, not just a rejection letter.
No. Buildwiser runs the check automatically, but it's built to make that check faster and catch failures earlier, not replace the judgment call a plan checker makes at permitting.
Yes. Every scenario stays live, change a spec and the compliance result re-runs automatically, without starting the analysis over.
Your result saves to your account immediately: pass or fail, system by system, plus the fastest path to a pass if anything failed.
Free directional numbers in minutes, no call required.